|
|
[Home] [Search] [FAQ] |
|---|---|
| [Private Message] [Register] [Profile] [Member list] [Log-in] |
| Who's Online: |
| There are 0 member(s), and 1 guest(s) online. |
| [Printable Version] [Post Reply] |
| Author | Message |
|---|---|
|
Anon Deleted Posts : Location : Status : Offline |
Choke cable Hey guys,Anyone know how to remove the choke cable on of CF1 panel van? Driving me nuts!! I need to change my dash pod surround. Cheers ears Ian ---------------------- |
 Sat 15 Jun 2013 @ 12:35
|    |
|
bluebedouin Global Moderator Posts : 2444 Location : Northampton,England. Status : Offline 
|
I would guess that once you've disconnected from the carb it would pull straight through.Then just unscrew the fitting from the dash. I've used long nosed pliers in the slots to loosen then free by hand. ---------------------- |
Sat 15 Jun 2013 @ 13:43
|
|
|
Anon Deleted Posts : Location : Status : Offline |
choke Hi Ian,the choke is held in place by a nut at the rear.To find it you must find the cable under the dash then follow it back to the dash.You will find the nut holding the cable in place at the dash.Undo said nut and pull cable out.To replace a cable reverse program.Don't forget to put the nut back when cable passes dash.Cheers+Beers,Jim.---------------------- |
Sat 15 Jun 2013 @ 21:46
| |
|
Anon Deleted Posts : Location : Status : Offline |
Mint, cheers mucker! |
Sun 16 Jun 2013 @ 12:23
| |
| Time in GMT | |
| [Post Reply] | |
 New posts since your last visit |
Administrative Functions: Open/Close/Delete Thread / Move Thread |
 Old post |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c