Bedford CF-UK Message Board Logo [Home] [Search] [FAQ]
Bedford CF-UK Message Board > CF Blog Spot > gearbox
[Private Message] [Register] [Profile] [Member list] [Log-in]
Who's Online:
There are 0 member(s), and 1 guest(s) online.
 
[Printable Version] [Post Reply]
Author Message
Anon
Deleted
Posts :
Location :
Status    : Offline

gearbox

At last I have the van back together,tomorow I will be road testing I am hopping that the new piece in the prop will not need balancing.I'll let you know as soon as.Cheers Jim.

----------------------

Mon 30 Jan 2017 @ 20:12 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Test drive.

Hi Jim,

It will be just fine hope you marked the prop-shaft before you took it off, if not it maybe half a turn out, as you will find out at about 43 mph.

doujoy

----------------------

Mon 30 Jan 2017 @ 20:45 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

prop shaft

Hi Doug,their was no marking to be done as the front shaft is all new,so will let you know tomorrow.Cheers Jim.

----------------------

Mon 30 Jan 2017 @ 21:05 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

test run

Hi,I took the3 van for a short run and the prop didn't rattle so fare so good .Their is a prob with the gearbox so I will have to contact Doug.Cheers Jim.

----------------------

Wed 01 Feb 2017 @ 20:16 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Checking.

Hi Jim,

Have you checked the cross-member height and that the gear-lever is not catching on the floor panel when you put the stick into first gear?
First gear is the longest stick movement and may not be going right into gear.

doujoy

----------------------

Sat 04 Feb 2017 @ 12:59 Edit this messageQuote this messagePMQuote this message
Time in GMT
[Post Reply]
New posts since your last visit Administrative Functions: Open/Close/Delete Thread / Move Thread
Old post

Forum Jump:

Back to the CF-UK Homepage ][ Email CF-UK

Powered by FunkBoard vCF0.74c